If your Bissell ProHeat 2X Revolution Pet Turbo (model 35799) isn’t spraying water or cleaning solution, it can hinder your carpet cleaning efforts. Fortunately, most issues are fixable with simple troubleshooting steps. This guide will walk you through common causes and safe, effective solutions to get your machine back in top shape.
Understanding the potential reasons for your cleaner’s spray failure helps you quickly identify and fix the problem, saving time and effort while maintaining your carpet’s cleanliness.
Key Takeaways
| Clogged Nozzle | Blockages can prevent spray flow, often caused by dried or debris-laden solution. |
| Empty or Faulty Water Tank | Low water levels or damaged tanks hinder spray function. |
| Air Blockages | Airlocks in hoses or pump systems can stop water from reaching the spray nozzle. |
| Pump or Motor Issues | Malfunctions in the pump or motor reduce or stop spray output. |
| Blocked or Dirty Filters | Clogged filters restrict water flow and spray performance. |
Check and Clear the Nozzle
- Turn off and unplug your Bissell cleaner for safety.
- Locate the spray nozzle at the front of the machine.
- Inspect it for debris, dried solution, or blockages.
- Use a small brush or toothpick to gently clear any obstructions.
- Rinse with warm water if needed, then dry thoroughly before testing.
Verify Water Tank and Solution
- Ensure the water tank is filled to the appropriate level with clean water and solution.
- Check for cracks or leaks in the tank that could impair water flow.
- Reinstall the tank securely into the machine.
Address Air Blockages
- Remove hoses connected to the water tank and spray nozzle.
- Check for kinks, clogs, or airlocks in the hoses.
- Pour warm water through hoses to flush out any obstructions.
- Reassemble hoses securely, ensuring no air is trapped.
Inspect and Clean Filters and Pump
- Locate the filters as per your model’s manual. Clean or replace if dirty or clogged.
- Check the pump for signs of malfunction or leaks.
- If the pump is not operating correctly, consider professional repair or replacement.
Test and Confirm Spray Function
After completing the above steps, plug in your cleaner and turn it on. Engage the spray function to verify water or solution is being ejected properly. If issues persist, consult your user manual or contact support for further assistance.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Suction Power: Enhanced by TurboStrength motor
- ✔ Cleaning Modes: MAX and Express
- ✔ Technology: Heatwave technology
JORAIR Brush Replacement Compatible
- ✔ Brush Roll: Multi-surface compatible
- ✔ Filters: Reusable and effective
- ✔ Packaging: 3 packs of each component
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner combines powerful suction with specialized features for pet messes. Its TurboStrength motor provides 40% more suction power, making it efficient at removing embedded dirt and stains. The heatwave technology helps maintain water temperature for optimal cleaning, and the dual dirtlifter powerbrushes ensure thorough dirt removal.
Pros:
- Powerful suction with TurboStrength motor
- Effective pet stain removal
- Heatwave technology for consistent water temperature
- Multiple cleaning modes including MAX and Express
Cons:
- Heavier than some models
- Requires regular maintenance for optimal performance
- Can be noisy during operation
Best for: Pet owners and households with heavily soiled carpets
Not ideal for: Light cleaning tasks or small area jobs
Bottom line: A powerful, pet-friendly carpet cleaner with advanced features for deep cleaning.
JORAIR Brush Replacement Compatible
This compatible brush replacement includes multi-surface brush rolls and filters, ideal for maintaining your Bissell CrossWave or similar models. It ensures your machine continues to perform at peak efficiency, especially when cleaning stubborn dirt and pet hair.
Pros:
- Easy to install
- Improves cleaning performance
- Cost-effective replacement
- Compatible with multiple Bissell CrossWave models
Cons:
- Limited to specific models
- Requires periodic replacement
- May need additional tools for installation
Best for: Maintaining optimal suction and cleaning power
Not ideal for: For non-compatible models or minimal maintenance needs
Bottom line: Essential maintenance kit to keep your machine performing flawlessly.
Frequently Asked Questions
Why is my Bissell not spraying water?
Common causes include clogs in the nozzle or hoses, empty water tanks, or airlocks in the system. Checking these parts and cleaning or refilling them often resolves the issue.
How do I clear a clog in the spray nozzle?
Turn off and unplug the machine, locate the nozzle, and gently clear any debris with a small brush or toothpick. Rinse thoroughly with warm water before reassembling.
What should I do if the water tank is full but no spray occurs?
Ensure the tank is properly seated and free of cracks. Check for blockages in the hose or filter. Clean or replace the filter if dirty.
Can I use different cleaning solutions?
It’s best to use Bissell Multi-Surface Solution or the recommended deep cleaning formulas to prevent damage and ensure optimal spray performance.
Get Your Carpet Looking Like New Again
By following these troubleshooting steps, you can often resolve spray issues with your Bissell ProHeat 2X Revolution Pet Turbo. Regular maintenance, such as cleaning filters and nozzles, will keep your machine performing at its best, ensuring deep, effective cleaning every time. If problems persist, professional repair may be necessary, but most spray issues are simple fixes you can do yourself.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
